Ableton comes equipped with 36 stock Ableton

• Ableton Eq Eight Alternative
• Ableton Eq Eight Presets
• Eq Eight Ableton Live Light
• Ableton Live 10 Lite Eq Eight
• Ableton Live 9 Intro Review

EQing Basics in Ableton: EQing the pads of our Deep House template for starters - Mixing and MasteringGrab the template here: http://bit.ly/pmlstmpstartt. EQ Eight is one of the most important production tools in Ableton Live. Today I’m going to show you when and how to use it. What is the frequency spectrum? To understand what EQ does you need to get a sense of what the frequency spectrum is. Make sure to wear headphones or listen on good speakers with a lot of low frequencies.

Audio Effects. Did you know that 9 of them are expandable for extra features?
In this article, you’ll learn about the 9 expandable Ableton Audio Effects, and how you can use them. For more interesting production techniques in Ableton, check out our Ableton Projects Collection. This is an Intermediate/Advanced guide, so if you are new to Ableton, this might be difficult to understand.

What exactly is an expandable Ableton audio effect?

Have you ever noticed this little triangle icon, next to the “On/Off” switch in the title bar of an Audio Effect?
Here’s what I’m talking about:
Here are the 9 expandable Ableton Audio Effect Racks, along with an in-depth guide, showing you how to use them.

Ableton Audio Effect 1: Auto Filter

Ableton’s Auto Filter can be quite powerful under the hood. I see most people just using it for regular filter automation, but there is so much more you can do with it.
Let’s start off by taking a look at Auto Filter’s expanded section.
To access the Sidechain parameters, unfold the Auto Filter window by toggling the triangle button in it’s title bar.
So you might ask, how does Auto Filter make use of a Sidechain?
Normally, the signal that is being filtered and the input signal that triggers the Auto Filters Envelope are the same signal. Having a sidechain feature makes it possible to filter a signal using the envelope/dynamics of an external signal.
Keep in mind that the Envelope section goes hand in hand with the Sidechain section.
Let’s take a closer look at the sidechain settings.
Here is a more in-depth description of all these settings and knobs.

• Sidechain On/Off: When this is turned on, the “Sidechain” button will turn yellow to indicate that the Auto Filters sidechain input is now activated. In order for the sidechain to take affect, we need to set an audio source & tapping point.

• Sidechain audio source & tapping point: This section lets us select where the sidechain signal is coming from. Clicking on the first box will open a list of all the tracks in your project. Let’s say you want the filter to react every time a “kick” sample is played. We can use the kick as a trigger to move the filter frequency cutoff according to the envelope of the kick sample. Simply select the kick track.

Tapping point:
Clicking on the second box will display a list of:

• Pre FX: This will take the signal before it goes through the effects chain.

• Post FX: This will take the signal after it has been processed by the effects chain.

• Post Mixer: This will take the signal with after going through the channel's volume fader.

Note: If you want to use a signal from a specific drumpad on Ableton’s Drum Rack, select the drum rack as the signal source in the first box, and then you can select the specific drum pad you want from the second box (tapping point).

• Audio source input gain: Controls the volume of the signal coming into the sidechain. Adjusting this knob does not affect to the main track signal. Adjusting this knob can however change the extent of the filter frequency cutoff movement.

• External/Internal mix: Adjust the balance between external and internal signal used for triggering the device. Dry=Internal and Wet=External trigger.

Now on the the Envelope section!

• Envelope amount: Controls how much the envelope affects the filter frequency.

• Envelope attack: Controls how quickly the auto filter responds to rising input levels.

• Envelope release: Controls how quickly the auto filter responds to falling input levels.

Here are a few examples of how you can use this in your productions:
The most common reason to use this is to sidechain the low-frequency of a sound to sweep out of the way of the kick or snare. The cool thing about using Auto Filter Sidechaining is that we can use the kick to trigger the filter to quickly high-pass. This will prevent any frequency clashing in the low-end of your synths/basses and your kick.
This is how it’s setup:
So what exactly is happening here?
The sidechain input signal comes from a Kick track. Every time the kick’s signal enters the sidechain, the filter frequency will be high-passed. This happens because the Envelope Amount is turned to it’s highest value, meaning the high-pass filter that is selected, will sweep all the way up to it’s maximum value while there is a signal coming in through the sidechain. The Attack time indicates that the filter will react immediately rising input signals. The Release is set to 16 ms which means that the filter will wait 16 ms after the incoming sidechain signal drops, to follow it’s envelope.
Here’s what that sounds like in context:
The kick track is muted but it’s signal is still being sent to the Auto Filter Sidechain. I used a basic 4x4 kick pattern to demonstrate the filter sidechaining.
Before Sidechain Filter:

Your browser does not support the audio element.

After Sidechain Filter:

Your browser does not support the audio element.

Here’s what it sounds like with a more exaggerated release time of 120 ms.

Your browser does not support the audio element.

It’s also possible to invert this effect, where the incoming signal triggers a low-pass filter to open up. This can be interesting when using percussion loops to trigger the sidechain.
Here are the settings I’m using to achieve that. The only thing I did was change the high-pass filter to a low-pass filter and increase the release time to 120 ms to let the filter frequency have some time to return back to it’s original position.
Here’s what it sounds like now with the same 4x4 kick pattern.

Your browser does not support the audio element.

As you could imagine, there are many possibilities when using the sidechain feature in Auto Filter. Try experimenting with some different filters and see what happens!

Ableton Audio Effect 2 & 3: Compressor / Glue Compressor

Sidechaining is most commonly used with Ableton’s Compressor and Glue Compressor. They both have the same sidechain features, so I’ll explain the sidechain settings for the Compressor and you’ll be able to translate it to the Glue Compressor.
Here’s what they look like when they’re expanded.
Compressor:
Glue Compressor:
Unlike the Auto Filter, Ableton compressor changes the dynamics of a signal. When utilizing the compressor's sidechain, it’s possible to change the dynamics of a sound according to the envelope of the external sidechain input.
The easiest way to visualize this is by looking at Compressor’sActivity View.
Here’s what that sounds like:

Your browser does not support the audio element.

As we can hear, whenever the kick signal enters the sidechain, the signal of the bass ducks down.
The attack, release and ratio control the following:

• Attack: Controls how quickly the compressor responds rising sidechain signals.

• Release: Controls how quickly the compressor responds to falling sidechain signals.

• Ratio: Sets the ratio of compression between the input and output level.

Note: With a ratio of inf : 1, for ANY number of dB that inputs the compressor above its threshold, the output will only increase by 1dB.
Let’s take a look at the EQ section.
This section will filter the sidechain input signal. This does not affect the original source signal. Any changes made in the EQ section will not make an audible difference except for change what frequencies of the sidechain input signal are being used.
Clicking on the “EQ” button will enable the sidechain input EQ Filter. This makes it possible to EQ the incoming sidechain signal. Using kicks or snares as sidechain signals often result in longer volume ducking because due to the long low end tail of the kick or snare signal. Using an EQ to filter out the low frequencies makes it possible to have a quicker sidechain because only the high frequencies are being used (which is usually the transient) to trigger the compressor.
As we see in the picture above, I high-passed the kick signal to 353 Hz. The low-end tail of the kick is filtered out and this results in a quicker response. Keep in mind that this only because the high frequency transient of the kick is shorter/quicker than the low end tail. Using sidechain EQ doesn’t make the sidechain ducking quicker. It only filters the incoming sidechain signal.
Here’s what it sounds like now:

Your browser does not support the audio element.

As we can hear, the sidechain ducking is very short.
You can use different filters to isolate certain frequencies of your sidechain signal.
It’s also possible to replicate this by just using a very short transient as a sidechain input signal. Just mute the track that the trigger is coming from s it’s not audible in your project.

Ableton Audio Effect 4: Multiband Dynamics

Multiband Dynamics sidechain feature can be a little intimidating to understand and utilize at first. I won’t fully go into how Ableton’s Multiband Dynamics works, but we’ll scrape the surface enough for you to start using it’s sidechain feature.
Let’s take a look at the expanded sidechain feature.
Essentially, Multiband Dynamics is 3 separate compressors+expanders for 3 separate frequency bands.
It’s possible to use an external signal to either compress or expand the signal which the Multiband Dynamic Effect is applied to.
This means that we can apply sidechaining to individual frequency bands. This is useful for ducking the low-end of a bass to a when a kick drum is played, so the low frequencies don’t clash.
For simplicity, I’ll disable the low and high bands of the Multiband Dynamic plugin, which results in the middle frequency band spanning the whole frequency spectrum. Essentially now it’s just a regular compressor/expander.
With the sidechain signal still coming from the kick, let’s setup a simple downward compression triggered by the kicks signal envelope.
In this case, we only want to focus on what happens to the signal above the threshold.
So what exactly is going on here?
Alright, let’s break it down. Here are the settings (they are quite drastic for demonstration purposes)
Threshold = - 50dB
Ratio = 1 : inf
When the sidechain signal enters the Multiband Dynamic, it will downward compres, causing the main signal to get quieter.The Ratioof 1 : infmeans that for ANY number of dB (inf) that passes the threshold of -50db, the output increases by only1dB.
Since the signal can’t be louder than infinite dB, the output will only ever be 1 dB above -50 dB(threshold), which in result is really quiet. This is what the “volume ducking” sidechain effect is.
We can create the inverse effect which is upward expansion. This means that when the sidechain signal exceeds the threshold. The main signal will increase in volume accordingly according to the threshold.
A ratio of 1:0.50 means that for every0.5 dB over the threshold, the output will increase by 1 dB.
Here’s what that looks like:

Ableton Audio Effect 5: Gate

If you aren’t sure what a Gate does, here’s a brief excerpt out of Live’s Manual
“The Gate effect passes only signals whose level exceeds a user-specified threshold.”
So by default, the gate let’s signals through which exceed it’s set threshold, the signal that determines this is also the same signal passing through the gate. But what if we want to use an external signal to trigger when the gate opens to let the main signal through?
For that, we can use the Gate’s extended sidechain feature.
Let’s take a look:
So with the same 4x4 kick pattern I’ve been using throughout this article, we can see the consistent peaks whenever the kick signal enters the sidechain. We can see that the Kick peaks at around -12 dB and the threshold is set to around -19 dB. Since the signal of the kick exceeds the threshold, the gate will open up, allowing the main signal to pass through.
Here’s what that sounds like:

Your browser does not support the audio element.

Similar to the compressor's sidechain, we also have an EQ filter section, to filter the incoming sidechain signal.

Ableton Audio Effect 6: EQ Eight

Ableton stock plugin’s have one little downside, they are so small! The extended toggle feature in EQ Eight makes it possible to change the display location and enlarge the EQ to a more workable size. This is simple yet very effective whenever you need to see an expanded display of Ableton's EQ. To adjust the height of the extended EQ display, simply drag it’s top bar up or down.

Ableton Audio Effect 7: Saturator

Let’s take a look at Saturators expanded features:
Upon toggling Saturators expanded features, we see 6 additional settings. Drive, Curve, Depth, Lin, Damp and Period. These features are only available when using the waveshaper curve type. These settings make it possible to create a custom saturation curve.
Here’s what they do:
Drive: This determines how much the input signal will be affected by the other five waveshaper parameters. Setting Drive to 0% will negate the effect entirely.
Curve: Adds mostly third-order harmonics to the input signal.
Depth: Superimposes a sine wave onto the Waveshaper curve and sets its amplitude.
Lin: Works together with the Curve and Depth parameters to alter the linear portion of the Waveshaper curve.
Damp: Flattens signals near the grids origin. This acts like a ultra-fast noise gate.
Period: Determines the number of ripples in the sine-wave created by the Depth parameter.
Note: Experiment with these settings and see what they do/how they can change the Waveshaping curve. Saturator gives visual feedback upon adjusting the settings.
This allows for many possibilities beyond the 6 default waveshaping curves.
Here’s what a Waveshaping curve looks like with some random settings:

Ableton Audio Effect 8: Corpus

Corpus is an effect that simulates the acoustic characteristics of seven types of resonant objects.
By default, it’s resonant pitch is determined by the Transpose and Fine knobs. Unless modulated, these stay at a static pitch.
It’s possible to use external midi information to control the resonant pitch by utilizing the Sidechain feature in Corpus.
The frequency and/or decay rate of the resonance can be MIDI modulated, by enabling the
Frequency and/or Off Decay switches in the Sidechain section.
The “MIDI From” choosers allow you to select the MIDI track and tapping point from which to receive MIDI note information.
With Frequency enabled, the tuning of the resonance is determined by the incoming MIDI note.
If multiple notes are held simultaneously, the Last/Low switch determines whether the last or the lowest note will have priority.
The Transpose and Fine knobs allow for coarse and fine offset of the MIDI-modulated tuning. PB Range sets the range in semitones of pitch bend modulation.
With Frequency disabled, the Tune control adjusts the base frequency of the resonance in Hertz.
The corresponding MIDI note number and fine tuning offset in cents is displayed below.
Enabling Off Decay causes MIDI note off messages to mute the resonance. The slider below the switch determines the extent to which MIDI note off messages mute the resonance. At 0%, note offs are ignored, and the decay time is based only on the value of the Decay parameter, which is located under the Resonance Type selector.

Ableton Audio Effect 9: Spectrum

Last but not least, Ableton’s spectrum can change it’s display location, similar to EQ Eight’s extended feature. This is very useful for taking a closer look at the frequency spectrum.
Simply click the triangle toggle in Spectrums title bar.
[x_line]

Conclusion

Ableton is a massive program with many features. I hope this article gave you some more insight on Ableton Audio Effect extensions. Some of these might be hard to understand at first but anything becomes easy with enough practice. The best thing you can do to get better is to experiment with all the settings and continue to study things you are unsure of! Thank you for reading this article!
Keep your eyes peeled for part 2 of this series, coming soon..
Do you have any tips on Ableton audio effects you want to share? Comment Below and let us know!
If you liked this blog post then it’s safe to say you’re an Ableton user. Get some free Ableton project files here.

In this Ableton Live tutorial, Dubspot’s Rory PQ takes us through the steps for building transparent Multiband Phase Inversion Racks and shares his insight into multiband processing. Included is a FREE Ableton Live Audio Effect Rack. Check out our Music Production course with Ableton Live to learn more. Classes start soon,See Dates and Register!

The Power of Racks in Live

One of the most powerful features in Ableton Live that sets it apart from other DAW’s is its ability to create custom Racks for various purposes. A Rack is a flexible tool for working with effects, instruments, samples, and third-party plugins in a track’s device chain. They can be used to build complex signal processors, stack instruments and effects, create dynamic performance instruments, separate frequency bands, and so much more. Racks also streamline your device chain by bringing together your most essential controls using Macros. In short, Racks excel at handling multiple devices, signal paths, and control relationships between multiple parameters.

In this tutorial, we will look at using the power of Racks, clever Macro mapping, and phase inversion to build transparent Multiband Effect Racks that split the input signal into separate frequency bands for applying parallel processing. In addition, we have included a FREE download that includes four different Multiband Effect Racks.

What’s included:

2 Band Frequency Phase Inversion Rack
3 Band Frequency Phase Inversion Rack
4 Band Frequency Phase Inversion Rack
5 Band Frequency Phase Inversion Rack

Multiband Processing in Live

Multiband processing is an essential technique used in sound design, mixing and mastering, and live performance. Many plugins and DAWs have multiband features that allow us to separate sounds into different frequency bands so that each band can be processed independently. Ableton Live’s Instrument and Audio Effect Racks have the unique ability to create multiple device chains that allow us to separate the input signal into different channels that operate in parallel. This marvelous feature gives us the power to create multiple frequency bands that can be loaded with their own custom device chains. Splitting the frequency spectrum into fully adjustable and independent bands gives us the ability to process different parts of the sound separately. This flexibility allows us to have more control over the sound. For example, you could split a bass sound into Low, Mid, and High frequency bands. On the Low band, you could mono the sound to keep your sub frequencies tight and clean. For the Mid band, you could add some saturation to bring out the body of the bass, while adding some stereo imaging and reverb to the High band to create a fat bass sound that is more powerful than a bass sound without multiband processing.

Building Multiband Phase Inversion Effect Racks in Live

Ableton Eq Eight Alternative

There are a few different approaches to building a Multiband Effect Racks in Ableton Live. The simplest way is to create an Audio Effect Rack that has three device chains each loaded with an EQ Eight or EQ Three. On the Low-frequency band set the EQ filter to lowpass, Mid-frequency band to a bandpass filter, and the High-frequency band to a highpass filter. The problem with this approach is that the frequency overlap at the crossover points could potentially cause some phasing issues. Also, there are small gaps where two bands meet causing a dip in frequency at the crossover points. In other words, this approach is the least transparent way of building a Multiband Effect Rack.

Another approach to building a Multiband Effect Rack in Live is to load a Multiband Dynamics device on three separate device chains in an Audio Effect Rack, and then enable the Solo button for each independent frequency band. This method sounds more transparent than using separate EQ filters and works well. However, the sound seems colored and is not 100% transparent. What is transparent you may ask? In this example, a transparent sounding Audio Effect Rack will sound the same when enabled or disabled. There is no audible change in the sound when toggling the rack on and off.

The best way to build a Multiband Effect Rack in Live that is the most transparent is to use a phase inversion technique I learned from Mr. Bill that requires a clever combination of EQ frequency Macro mappings and control over the phase of a channel using Live’s Utility device. This approach is a bit more complicated to set up, but the result is worth the hassle. Better yet, we did the work for you. Download the free racks above and you’re ready to go.

Let’s dive deeper into this approach and build a Multiband Phase Inversion Rack from scratch so you can get a better understanding how this concept works.

Step 1 | Creating an Audio Effect Rack

In this first step, we will create an Audio Effect Rack that will contain multiple devices and chains for our different frequency bands.

• Create a new Audio track and load an EQ Eight.
• Create an Audio Effect Rack by selecting the EQ Eight and clicking CMD+G [MAC] or CTRL+G [PC].

Step 2 | Duplicating Device Chains

For this step, we will duplicate chains rather than creating new chains and loading the devices again. This approach will save time.

• Duplicate the device chain twice so there are three chains total by clicking CMD+D [MAC] or CTRL+D [PC].
• Rename the three chains Low, Mid, and High.

Step 3 | Assigning EQ Frequency Crossover Macro Controls

For this step, we will set up the EQ filters for the High and Low bands as well as assign Macro Controls for the filter crossover points.

• Select the Low chain and set the EQ Eight filter type to lowpass.
• Right-click the filters Frequency control and assign it to Macro 1
• Rename Macro 1 to Low X-Over.
• Select the High chain and set the EQ Eight filter type to highpass.
• Right-click the filters Frequency control and assign it to Macro 2.
• Rename Macro 2 to High X-Over.

Step 4 | Phase Inversion

In this final step, we will create another Audio Effect Rack on the Mid band with three additional chains. Two chains will use EQ Eight and Utility to phase invert low and high frequencies, which will cancel out those bands and leave us with only the mid frequencies for the Mid band. The third chain will allow only the mid frequencies to pass through.

• Select the Mid chain and drop in a Utility device after EQ Eight.
• Enable the Left and Right Phase switches on Utility.
• Group the EQ Eight and Utility in another Audio Effect Rack by clicking CMD+G [MAC] or CTRL+G [PC].
• Duplicate the device chain so there are two chains total by clicking CMD+D [MAC] or CTRL+D [PC].
• Create a third chain that will not contain any devices.
• Rename the empty chain ‘Dry,’ and the other two chains ‘Low Phase’ and ‘High Phase.’

Ableton Eq Eight Presets

• Select the ‘Low Phase’ chain and set the EQ Eight filter type to lowpass.
• Right-click the filters Frequency control and assign it to Macro 1.
• Select the ‘High Phase’ chain and set the EQ Eight filter type to highpass.
• Right-click the filters Frequency control and assign it to Macro 2.
• Assign Macro 1 to Low X-Over and Macro 2 to High X-Over.

Adding Additional Effects

Using the steps above, you can create Multiband Effect Racks with as many frequency bands as you like. Once you have your racks built, try loading different Audio Effects or your favorite third-party plugins on each band to create more interesting sounds. Think of these racks as the foundation for building more complex Audio Effect Racks. For example, you could load a Compressor or Saturator to each band and instantly have a powerful Multiband Compressor or Multiband Saturator. The possibilities are up to you, we encourage everyone to experiment and come up with truly unique Multiband Effect Racks for all types of musical purposes.

Ableton Live Producer Certificate Program

The flagship of our music training, with every Ableton Live course offered at the school. After completing this program, you will leave with a portfolio of original tracks, a remix entered in an active contest, a scored commercial to widen your scope, and the Dubspot Producer’s Certificate in Ableton Live.

What’s Included:

• Ableton Live Level 1: Beats, Sketches, and Ideas
• Ableton Live Level 2: Analyze, Deconstruct, Recompose, and Assemble
• Ableton Live Level 3: Synthesis and Original Sound Creation
• Ableton Live Level 4: Advanced Sound Creation
• Ableton Live Level 5: Advanced Effect Processing
• Ableton Live Level 6: Going Global with your Music

Eq Eight Ableton Live Light

This program is about learning Ableton Live by going through the entire process of being an artist, by developing your own sound through a series of sketches and experimentation. You will also learn the ins and outs of this powerful software through a series of exercises designed to help you master the steps involved in producing your own music. After a level of getting familiar with the tools that Ableton has to offer, you will then develop your sonic ideas into full-length tracks. You will be exposed to a variety of approaches to arrangement and composition, storytelling techniques, ways of creating tension and drama in your music. At the end of the day, it is the sum total of your choices as an artist that define your sound, and Levels 2 – 6 will give you the experience of actually completing tracks to add to your portfolio.

Ableton Live 10 Lite Eq Eight

Click here for detailed information on this program, including start dates and payment plans.

Ableton Live 9 Intro Review

Or if you have questions, please call 877.DUBSPOT or send us a message.